When it comes to installing underground pipes, many contractors turn to a digging method known as non-dig technology.
This approach allows for the installation of pipes without damaging the surrounding area. In this blog post, you will learn more about why non-dig technology is the best way to install pipes.
You will also learn about some of the benefits of using this approach. So, if you are looking for an effective and efficient way to install underground pipes, read on!
What is Non-Dig Technology and How Does It Work?
The non-dig technique is how to proceed when installing pipes to avoid excavation and Picote cutting to eliminate any ignorant liners and roots.
Root cutting, lateral cutting, descaling, renovating cast iron, renovating pitch fibre, and rectification of linings are all effective uses for it. This non-dig technology uses an electric machine with rotary cutting blades that tunnel through the soil up to the pipe to be repaired and then cut roots; it simultaneously removes the excess soil.
It also cuts through the lining and cuts the lateral pipe without causing any damage. The lining and the lateral pipe are then extracted through the machine’s pipe-extraction head.
The removal is clean and the liner is always retained by the suction system of the cutter head. Once the lateral has been removed, the cutter head is then lowered into the ground where the new liner will be installed and a new lateral will be attached.
Laterals can also be removed with a chain or manual excavator.
The Benefits of Using Non-Dig Technology
When using non-dig technology, there are many benefits associated with it. See below for some examples of these benefits:
Cost Effective: As non-dig technology does not require the contractors to dig holes into your garden to install new cables, all the associated labour costs that go along with digging holes are eliminated. One of the highest costs for a non-dig installation is the removal of your existing cables. This removal cost, however, is eliminated by using non-dig technology.
Fast Installation: The installation process for non-dig technology is much quicker than installing cables through existing pipes. This can potentially mean that a non-dig installation can be completed in as little as one day.
Damage to Gardens and Property: The installation of non-dig technology does not cause any damage to gardens and property. The installation process does not involve digging holes into the garden, so no damage is done to the garden or surrounding structures.
Less Noise: When installing cables through existing pipes, the contractors need to use noisy machines to break through the concrete and asphalt to install the cables. However, when using non-dig technology, this noise is eliminated as all the cables are laid underground, and therefore no noise is produced during the construction process.
Less Risk: The installation of non-dig technology does not require using heavy equipment, such as excavators, which means there is less risk involved in the installation process. When heavy equipment is used to install cables through existing pipelines, there is always a risk of damaging the pipelines.
However, with non-dig techniques, there is no risk involved as no heavy machinery is used during installation.
How Can Non-Dig Technology Save You Time and Money?
Non-dig technology can save both time and money.
First, non-dig technology eliminates the need to dig out the ground to install underground pipes. Digging up the ground can be expensive and time-consuming.
For example, installing underground pipes in a parking lot can require weeks or months of work. Non-dig technology also saves money because you don’t have to spend money on buying or renting equipment to dig into the ground.
Overall, non-dig technology helps you to save time and money.
Some of the Challenges Associated with Traditional Digging Methods
Traditional digging methods are usually associated with obstacles such as cost and inefficiency.
Traditional digging methods are usually very labour-intensive, meaning that they require a lot of work. These challenges have forced the agricultural industry to find more efficient ways of digging.
Traditional digging methods are also expensive because fuel is usually required for the digging. However, new digging methods have been developed to overcome these challenges.
For instance, new digging methods have reduced the amount of labour required during digging, leading to a reduction in labour costs. Also, new digging methods have reduced the need for fuel, reducing the cost of fuel significantly.
Furthermore, new digging methods have minimised the environmental impact of digging, leading to the conservation of the environment.
How to Choose the Right Contractor for Your Project?
When selecting a contractor for your project, there are several factors to consider.
Choosing a trustworthy and dependable contractor is the first step. You need to check the references and consider the cost. Contractors typically charge hourly or by the job, but getting an estimate is always a good idea.
Once you’ve considered these factors and found the right contractor for your project, you’ll be well on your way to success! Here at West Country Drainage Services, we offer a Non-Dig Pipe Installation service that will eliminate the need for excavations.
Non-dig technology uses various methods to avoid the need for traditional digging.
This can include trenchless drilling, pipe bursting, or hydro-vacuum excavation. Each method has benefits that can save you time and money on your next project.
However, any new technology has challenges associated with its use. That’s why choosing the right contractor who understands how to use non-dig technology effectively for your specific needs is essential.
Contact us today if you want to learn more about this exciting new technology or help get started on your next project!